Shed to Granny Flat Conversion

Yes you can convert your Shed into a Liveable Granny Flat.

The most important considerations are;

1. Vapour Barrier Under Existing Slab

Verify the existing slabs have a vapour barrier (plastic) beneath them.  This is important to stop moisture coming up from under the slab to the surface of the slab.  This is not needed for non-habitable use – but it is for habitable use.  If there are no records of the original slab design plan and inspection records, then the best way to verify this issue is to get an independent structural engineer out to inspect and confirm. This would normally involve a core drill sample of the slab with a concrete cutter.

At CVL Engineers, we facilitate this on behalf of clients.

2. Legal Height of 2.4m from Floor to Ceiling

Most shed have a pitched roof that allows compliance with this requirement. It is important to note that where a 2.4m floor to ceiling height cannot be achieved such as topping up of slab to comply with the item 1 above then a Performance Solution would be required for heights less than 2.4. This process takes into consideration other aspects such as number of openings (windows, doors etc) and their sizes. Simply put a Performance Solution is an assessment done by a qualified professional that seeks to demonstrate that the proposal even though not 2.4m as required still complies with the intended outcomes of the National Construction Code.

At CVL Engineers, we facilitate this on behalf of clients.

General Requirements for Building Approvals.

The general requirements for Shed to Granny Flat Conversion are listed below.  For more information on these items please refer to required documentation building for approvals.

  1. Architectural Plans.
  2. Engineering Plans and Form 15 Certificate
  3. Soil Testing Report.
  4. Plumbing & Drainage Approvals.
  5. Energy Efficiency Assessment Report.
  6. Builders Details or Owner Builder Permit.
  7. QBCC Home Warranty Insurance (except where work is done under Owner-Builder Permit).
  8. QLeave (for project costs more than $165,000.00).
  9. Build Over Sewer Approvals (where applicable as outlined above).
  10. Amenity & Aesthetics Referral with Local Council (where applicable as outlined above).

We trust that you find this information useful. Feel free to leave us a comment below for further clarification.

Leave a Reply

Your email address will not be published. Required fields are marked *

Contact us

Give us a call or fill in the form below and we'll contact you. We endeavor to answer all inquiries within 24 hours on business days.